With so many benefits to enjoy when using the PEX tubing, most people, and especially plumbers, has opted its use over the other tubes. This is not only because of its easy to install nature but also because of its durability and flexibility. However, unlike other installations, the installation of the PEX tubing in concrete walls is slightly different and here is a straightforward guide to help through this.

To start with, to help save on time and avoid poor results, it is imperative to assemble the required tools. These materials include PEX tubing fasteners, a pencil, a drill, concrete drill bit, a screw driver bit, concrete screws and the PEX tubing which should be got from a reputable store. The collection of these materials before the commencement of your work will help ease your work and give extraordinary results.

Great care has to be taken when getting the right PEX tubing fasteners for your concrete installation. Fasteners to be used in wall installation have to allow PEX tubing moving freely so as to allow for expansion and contraction without breaking. It is advisable to inspect the fasteners for sharp edges and pinch points to avoid the tubing damage. Ask your seller of the best fastener for the job or inquire from a plumber who concentrates on this plumbing. This will help ensure both quality and durability.

Need to take your time when making the measurements. Mark the location of each PEX tubing fasteners. Make sure that they are in level and at an appropriate distance. Moreover, it is essential that you reshape the edges if the tubing will go round a corner. Make sure that they are rounded to ensure smooth flow without any pinching of the PEX tubing which can lead to flow obstruction or rubbing which can lead to damages.

One   the path is set and ensured that it will be smooth, mark the screw holes for the fasteners. This can be done by holding the fasteners where they will be positioned and then outline the screw holes using a pencil. Mark for all fasteners.

The next step will be to make pilot holes for the screws. Fit a concrete drill bit on the drill and start to drill appropriate sizes. It is vital to put on some protective gears such as glasses and dust masks to avoid injuries. Then place the fasteners and fasten it with screws to the wall.

Related article: How to install PEX tubing in concrete slabs.